Fluid Energy Controls PulseStop Pulsation Dampener
Model 30PS-10G
Pulse-Stop 30PS-10G is a 10 cubic inch capacity pulsation
dampener designed for use in any water or oil hydraulic system. These models are especially suitable for reverse osmosis
applications.
Features
Significantly reduces pump pulsations.
Reduces pump vibration and noise.
Increases pump service life by reducing wear and fatigue
on internal pump parts.
Safe, tamper-proof non-repairable design.
Buna-N bladder with integral anti-extrusion button for long
life.
Chargeable with Dry Nitrogen in the field.
All wetted parts are 316 Stainless Steel for protection
against corrosion.
Specifications
Notes:
All dimensions and weights are for general information only. Since
products are in a continual state of refinement, please verify all
critical dimensions with Fluid Energy Controls Inc.
Volume ............................................ 10 cubic inches Maxiumum working pressure .................. 3,000 PSI Operating temperature range ............ +5°F to +176°F Port ........................ !/2" NPT male for easy installation Weight ....................................................... 2 pounds
Installation
Install the dampener as close as possible to the discharge
port of the pump.
Operation
Precharge the dampener with Dry Nitrogen to approximately
70% of system operating pressure. Check the precharge every
three months.
