| STAINLESS STEEL LUBE-OIL SYSTEM ACCUMULATORS |
APPLICATIONS:
Fluid Energy Controls, Inc. stainless steel bladder type hydraulic accumulators are specifically designed for a broad applications within Lube-Oil Systems of steam and gas turbines, compressors, and turbo-expanders. These accumulators properly selected will effectively maintain the lube oil pressure during standby pump acceleration from the idle state to operating speed, or during shutdown. The accumulator will act as auxiliary power source, or fluid energy device to maintain the required lube oil pressure at the bearings.
The bladder type design assures a positive separation of a Nitrogen gas pre-charged and the system’s lube oil.
STAINLESS STEEL LUBE-OIL SYSTEM ACCUMULATORS 850 PSI DESIGN PRESSURE
FEATURES:
|
Stainless Steel 304 construction |
|
||
|
|
Designed and stamped per ASME Code | |||
| Section VIII, Div. 1 | ||||
|
|
National Board Registered | |||
|
|
Meets API standard 614 | |||
|
850 psi maximum design pressure | |||
|
|
Temperature service -20oF to +185oF | |||
|
|
Safe, tamper proof design | |||
|
|
Buna-N compound bladder standard (other | |||
| compounds available) | ||||
|
|
2" NPT liquid connection |
|||
|
Specifications: |
| NOMINAL SIZE | PART NO. | GAS VOLUME IN CU. IN. | EST. DRY WEIGHT LBS | "A" DIM. IN. | "B" DIM. IN. | "C" DIM. IN. |
| 2-1/2 Gal. | 7294000 | 555 | 65 | 21-7/8 | 15-1/2 | 8-5/8 |
| 5 Gal. | 7945000 | 1095 | 96 | 34 | 27-1/2 | 8-5/8 |
| 10 Gal. | 7296000 | 2080 | 150 | 54-5/8 | 48-1/4 | 8-5/8 |
| 11 Gal. | 7297000 | 2360 | 161 | 60-3/4 | 54-1/8 | 8-5/8 |
| 15 Gal. | 7298000 | 3460 | 216 | 74-1/2 | 68-7/8 | 8-5/8 |
STAINLESS STEEL 15 GALLON TRANSFER BARRIER TYPE ACCUMULATORS, 850 PSI DESIGN PRESSURE
APPLICATIONS:
Fluid Energy Controls, Inc. stainless steel bladder accumulators are custom designed to provide positive separation between two different medias in a system (fluids, gas) where pressure developed on one side of the circuit must be transferred to another fluid without any possibility of intermixing. The accumulator bladder will act as a flexible barrier between two fluids or between a fluid and a gas providing instantaneous response without reducing the system pressure.
| FEATURES: |
|
|||
|
|
Stainless steel 304 construction | |||
|
|
Designed and stamped per ASME Code | |||
| Section VIII, Div. 1 and National Board Registered | ||||
|
|
850 psi design pressure | |||
|
|
Temperature service -20oF to +185oF | |||
|
|
Safe, tamper proof design | |||
|
|
Buna-N (Nitrile) compound bladder | |||
Other materials of construction, pressure and connections are available upon request.