Pulse Stop 30PS-10G

Pulse-Stop 30PS-10G is a 10 cubic inch capacity pulsation dampener designed for use in any water or oil hydraulic system. These models are especially suitable for reverse osmosis applications.

 

Features

  • Significantly reduces pump pulsations.
  • Reduces pump vibration and noise.
  • Increases pump service life by reducing wear and fatigue on internal pump parts.
  • Safe, tamper-proof non-repairable design.
  • Buna-N bladder with integral anti-extrusion button for long life.
  • Chargeable with Dry Nitrogen in the field.
  • All wetted parts are 316 Stainless Steel for protection against corrosion.


Installation

Install the dampener as close as possible to the discharge port of the pump.

Operation

Precharge the dampener with Dry Nitrogen to approximately 70% of system operating pressure. Check the precharge every three months.

Specifications
Volume 10 cubic inches
Maximum working pressure 3000 PSI
Operating temperature range +5°F to +176°F
Port 1/2" NPT male for easy installation
Weight 2 pounds